PT. Camar Indah Jaya Perkasa

Trikdis Cellular Communicator G16T

‘- Connects to any alarm panel which has a landline dialer.
– Transmits full event information to the security company’s monitoring station.
– Works with Protegus app. Users can arm/disarm their alarm system remotely and receive notifications about events.
– Can be ordered with 2G or 4G modem.

Connects to panel’s landline dialer:

  • Communicator can be connected to control panel’s landline dialer with 2 or 4 wires.
  • When connected with 4 wires, the landline between the panel and communicator will be monitored.

Sends events to monitoring station receiver:

  • Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
  • Can send event messages to SIA DC-09 receivers.
  • Can send event messages to SUR-GARD receivers. The annex has a table for converting Contact ID codes to SIA codes.
  • Connection supervision by polling to IP receiver every 30 seconds (or by user defined period).
  • Backup channel, that will be used if connection with the primary channel is lost.
  • Events can be reported to CMS with SMS messages. SMS will be sent even if data connection stops working in the mobile operator network.
  • With parallel communication channels events can be sent to two receivers at same time.
  • When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

  • Push” and special sound notifications informing about events.
  • Remote system Arm/Disarm.
  • Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
  • Remote temperature monitoring (with iO or iO-WL expanders).
  • Different user rights for administrator, installer and user.
  • Users can also be informed about events with SMS messages and phone calls.

Notifies users:

  • Users can be notified about events not only with Protegus app, but also with SMS messages and a call.

Controllable outputs and inputs:

  • 1 output, controlled via:
    • Protegus
    • SMS message.
  • 2 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals
  • Add additional inputs and controllable outputs with wired and wireless iO

Quick setup:

  • Settings can be saved to file and quickly written to other communicators.
  • Two access levels for configuring the device for CMS administrator and for installer.
  • Remote configuration and firmware updates.
Tag:

Butuh informasi lebih detail?

Butuh informasi lebih detail?

Bagikan produk ini:

Produk Serupa

Terakhir Dilihat

You haven't viewed at any of the products yet.
You haven't viewed at any of the products yet.